If you have a fire or water emergency, please call us now at (504) 348-7526

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration

What a Water Damage Company Can Do After a Pipe Break

9/12/2017 (Permalink)

What a Water Damage Company Can Do After a Pipe Break

There are few things worse than discovering a pipe break in the middle of the night. The only thing worse might be not finding that broken pipe until the following morning. As the water moves through the pipe, it doesn't distinguish between a crack or hole and its usual access point. It will keep flowing through that pipe and spilling out until you shut off the water and fix the pipe. Before trying to deal with the water cleanup and drying on your own, you can find out what a restoration and mitigation company will do about the water in a home or the water in a business that they see.

Controlling the Flow of Water

The first thing that a restoration company can do after a pipe break is find a way to control the flow of water. They can do this in one of two ways. If it's a supply line break that provides water to your toilet or an appliance, a technician can simply turn the shut off valve and stop the water. With broken pipes inside the walls, the tech will check the basement for the whole house water shut off valve. This usually sits on the front of the house and near the street. Turning this know shuts off all water to the house.

Inspecting for Common Types of Water Damage

Once the water stops flowing, the restoration company can do a thorough inspection and look for any common signs of water damage. Most damage seen in a flooded home is around the source of the leak. Very rarely will that flood damage spread to other areas of the home. For a pipe that breaks inside the wall, they may need to remove the drywall to check out the space between the walls. They may need to check inside the floors too.

Pumping Out Water

When a pipe break leads to a flooded home, mitigation and restoration experts must use extraction methods to remove the standing water in a business or home. The most common extraction method is the use of a flood pump. These are the same pumps used in homes after hurricane season. Depending on the amount of flood damage and the amount of water in the home, they may use multiple pumps rather than a single pump.

Drying Water in a Home

Whether they see water in a home or water in a business, the restoration company professionals will use drying methods to remove any water left behind by the pump. This pump can only remove the water that it touches or identifies in the room. Water cleanup restoration professionals will often set up and turn on the pump at night and let it run all night. They can then use restoration and drying methods to remove water in a home. Though using fans is one of the best ways to dry out that water, the methods used will depend on whether your flooded home has flood damage caused by clean or dirty water.

Determining whether the water in a home or business is dirty or clean is just one thing mitigation experts can do after you suffer a supply line break. The restoration company they work for can send equipment out to your home to help with the water cleanup process. Those tools can stop the flow of water moving towards the supply line break, kill any mold growing in the home and take care of water damage hidden deep inside the home.

Mitigation and restoration help is also suitable for water in a business. A commercial building owner can lose thousands of dollars a day during the water cleanup process, which is why a restoration company will act quickly and take steps to finish the job just as quickly. These mitigation companies can reduce flood damage in a flooded home after a supply line break or pipe break. Visit http://www.SERVPROtheneworleanswestbank.com for more information on water damage.

Other News

View Recent Posts